Universidad de Zaragoza Repository

Resumen: The present work studies the influence of the temperature (200-240 °C), pressure (38-50 bar), glycerol concentration (10-50 wt.%) and mass of catalyst/ glycerol mass flow rate ratio (W/mglycerol = 10-40 g catalyst min/g glycerol) during the aqueous phase reforming (APR) of a glycerol solution obtained from the production of biodiesel. The operating conditions exerted a statistically significant influence on the reforming results. Specifically, the global glycerol conversion and the carbon converted into gas and liquid products varied as follows: 4-100%, 1-80% and 16-93%, respectively. The gas phase was made up of H2 (8-55 vol.%), CO2 (34-66 vol.%), CO (0-4 vol.%) and CH4 (6-45 vol.%). The liquid phase consisted of a mixture of alcohols (monohydric: methanol and ethanol; and polyhydric: 1, 2-propanediol, 1, 2-ethanediol, 2, 3-butanediol), aldehydes (acetaldehyde), ketones (C3-ketones: acetone and 2-propanone-1-hydroxy; C4-ketones: 2-butanone-3-hydroxy and 2-butanone-1-hydroxy; and cyclic ketones), carboxylic acids (acetic and propionic acids) and esters (1, 2, 3-propanetriol-monoacetate), together with unreacted glycerol and water. The relative amount (free of water and un-reacted glycerol) of these compounds in the liquid phase was as follows: monohydric alcohols: 4-47%, polyhydric-alcohols: 14-68%, aldehydes: 0-5%, C3-ketones: 2-33%, C4-ketones: 0-10%, ciclo-ketones: 0-6%, carboxylic acids: 2-43%, and esters: 0-46%. This process turned out to be highly customisable for the valorisation of crude glycerol for the production of either gaseous or liquid products. Gas production is favoured at a low pressure (39 bar), high temperature (238 °C), high W/mglycerol ratio (38 g catalyst min/g glycerol) and employing a 15 wt.% glycerol solution. A high pressure (45 bar), medium temperature (216 °C), medium W/mglycerol ratio (22 g catalyst min/g glycerol) and the feeding of a 16 wt.% glycerol solution favours the production of liquid products.
Idioma: Inglés
DOI: 10.1016/j.enconman.2015.11.070
Año: 2016
Publicado en: ENERGY CONVERSION AND MANAGEMENT 110 (2016), 90-112
ISSN: 0196-8904
Financiación: info:eu-repo/grantAgreement/ES/MINECO/ENE2010-18985
Financiación: info:eu-repo/grantAgreement/ES/MINECO/ENE2013-41523-R
Tipo y forma: Article (PostPrint)
Área (Departamento): Ingeniería Química (Departamento de Ingeniería Química y Tecnologías del Medio Ambiente)

You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. You may not use the material for commercial purposes. If you remix, transform, or build upon the material, you may not distribute the modified material.

0
Exportado de SIDERAL (2017-01-16-14:15:45)

Este artículo se encuentra en las siguientes colecciones:
Articles > Artículos por área > Ingeniería Química

Visitas