Resumen: Mixed matrix membranes (MMMs) based on the polyimide Matrimid® (PI) with metal-organic framework (MOF) MIL-101(Cr) as porous nanostructured filler were synthesized and applied as separation element in a membrane reactor to carry out the esterification of acetic acid with ethanol. The MMMs were characterized by techniques including X-ray diffraction, IR spectroscopy and scanning electron microscopy. In order to compare the performance of MIL-101(Cr)-PI MMMs in the membrane reactor, pure PI and HKUST-1-PI membranes were also used. MMMs provided a better reactor performance than
the bare PI membrane because of the increase in permeability associated to the presence of MOF as filler. The PI membrane reactor barely achieved the same conversion as a fixed bed reactor, while the MIL- 101(Cr)-PI membrane showed a reactor performance similar to that of the HKUST-1-PI membrane with higher stability, as confirmed by membrane characterization after the reaction experiments.

Idioma: Inglés
DOI: 10.1016/j.renene.2015.11.025
Año: 2016
Publicado en: RENEWABLE ENERGY 88 (2016), 12-19
ISSN: 0960-1481

Financiación: info:eu-repo/grantAgreement/ES/MINECO/MAT2013-40556-R
Tipo y forma: Article (PrePrint)
Área (Departamento): Ingeniería Química (Departamento de Ingeniería Química y Tecnologías del Medio Ambiente)
0
Exportado de SIDERAL (2016-12-12-09:15:56)

Este artículo se encuentra en las siguientes colecciones:
articulos > articulos-por-area > ingenieria_quimica

Visitas


 Notice créée le 2016-12-12, modifiée le 2016-12-12


Liens externes:
Télécharger le documentPreprint
Télécharger le documentPreprint
Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)