Resumen: Dimethyl ether (DME) is a promising diesel fuel additive for reducing soot and NOx emissions, because of its interesting properties and the possibility of a renewable production. An experimental and modeling study of the oxidation of acetylene (C2H2, considered as an important soot precursor) and DME mixtures has been performed under well-controlled flow reactor conditions. The influence of temperature, air excess ratio (¿) and presence of NO on the oxidation process has been analyzed. Under fuel-rich conditions, the presence of DME in these mixtures modifies the radical pool delaying the acetylene consumption. C2H2 and DME, and the radicals generated in their conversion, interact with NO achieving different levels of NO concentration diminution depending upon the operating conditions. Under fuel-lean conditions, the presence of DME in the mixtures increases the NO diminution, whereas for the other values of ¿ considered, the maximum NO decrease reached is lower than that obtained in the case of pure acetylene.
Idioma: Inglés
DOI: 10.1016/j.fuel.2016.06.011
Año: 2016
Publicado en: FUEL 183 (2016), 1-8
ISSN: 0016-2361

Financiación: info:eu-repo/grantAgreement/ES/MINECO/CTQ2015-65226
Tipo y forma: Article (PostPrint)
Área (Departamento): Tecnologías del Medio Ambiente (Departamento de Ingeniería Química y Tecnologías del Medio Ambiente)
Área (Departamento): Ingeniería Química (Departamento de Ingeniería Química y Tecnologías del Medio Ambiente)

0
Exportado de SIDERAL (2016-07-15-11:04:16)

Este artículo se encuentra en las siguientes colecciones:
articulos > articulos-por-area > tecnologias_del_medio_ambiente
articulos > articulos-por-area > ingenieria_quimica

Visitas


 Notice créée le 2016-07-15, modifiée le 2016-10-06


Liens externes:
Télécharger le documentPostprint
Télécharger le documentPostprint
Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)